This program lists Non-Rev Reason Codes which were entered via the Edit Non-Rev Reason Codes program.

To access the Print Non-Rev Reason Codes program, type PRTNRC (RET) at any menu "OPTION:" field or the appropriate line number on the Print Rental Control Files Menu. The screen will then display:

OPTION: __ PRINT NON-REV REASON CODES 1 Start Code FIRST (Enter 2 char code; use leading zeros if numeric) 2 End Code LAST (Enter 2 char code; use leading zeros if numeric) 3 Print/Display P Printer: /dev/tty 1BEGIN 2 3ERASE 4 5BACKUP 6 7HELP 8

Enter data as follows:

1. START CODE	To limit the report, enter up to 2 alphanumeric characters for the starting code. If the code is numeric, press "F3" to erase the term "FIRST" and enter the number using leading zeros if necessary. Do not enter more than 2 characters. EXAMPLE: Press (RET)
2. END CODE	To limit the report, enter up to 2 alphanumeric characters for the ending code. If the code is numeric, press "F3" to erase the term "LAST" and enter the number using leading zeros if necessary. Do not enter more than 2 characters. EXAMPLE: Press (RET)
3. PRINT/DISPLAY	Enter: P = Print a hard copy of this report on your terminal's assigned printer or send as an e-mail. See the Edit Terminal Records Chapter for instructions on how to assign printers and send reports as e-mails. D = Display this report on your terminal screen. See the General Data Entry Instructions Chapter on how to control the screen display. EXAMPLE: Type P (RET)

PRESS "F1" at the "OPTION:" TO BEGIN.