This program
lists Tax Codes which were entered via the Edit Tax Codes program on the Accounting Control Files menu.
To access
the Print Tax Codes program, type PRTTAX (RET) at any menu
"OPTION:" field or the appropriate line number on the Print
Control Files Menu. The screen will then display:
| OPTION: __ PRINT TAX CODES 1 Start Code FIRST (Enter 3 char code; use leading zeros if numeric) 2 End Code LAST (Enter 3 char code; use leading zeros if numeric) 3 Print/Display P Printer: /dev/tty 1BEGIN 2 3ERASE 4 5BACKUP 6 7HELP 8 |
Enter data
as follows:
| 1. START CODE |
To limit the report, enter up to 3 alphanumeric characters for the starting code. If the code is numeric, press "F3" to erase the term "FIRST" and enter the number using leading zeros if necessary. Do not enter more than 3 characters. EXAMPLE: Press (RET) |
| 2. END CODE |
To limit the report, enter up to 3 alphanumeric characters for the
ending code. If the code is numeric, press "F3" to erase the term
"LAST" and enter the number using leading zeros if necessary. Do not
enter more than 3 characters. EXAMPLE: Type NT (RET) |
|
3. PRINT/ DISPLAY |
Enter: P = Print a
hard copy of this report on your terminal's assigned printer or send as an e-mail. See the Edit
Terminal Records Chapter for instructions on how to assign printers and send reports as e-mails. D = Display this report on your terminal screen. See the General Data Entry Instructions Chapter on how to control the screen display. EXAMPLE: Type P (RET) |
PRESS "F1"AT "OPTION:" TO BEGIN.