This program lists acceptable Vehicle Status Codes and types which were entered via the Edit Status Code program.
To access
the Print Status Codes program, type PRTSTA (RET) at any menu "OPTION:"
field or the appropriate line number on the Print Fleet Control Files sub-menu of the Print Control Files menu.
The screen will then display:
| OPTION: __ PRINT VEHICLE STATUS CODES 1 Start Code FIRST 2 End Code LAST 3 Status types ALL 4 Print/Display P 1BEGIN 2 3ERASE 4 5BACKUP 6 7HELP 8 |
Enter data
as follows:
|
1. START CODE |
Enter either a single alpha character or press RET to default to the FIRST Status Code. EXAMPLE: Type A (RET) |
|
2. END CODE |
Enter either a single alpha character or press RET to default to the LAST Status Code. EXAMPLE: Press RET |
|
3. STATUS TYPES |
Enter either, a single alpha character to indicate which vehicle Status Type you wish to report, or , press RET to default to ALL Status Types. Valid Status Types are:
EXAMPLE: Type A (RET) |
|
4. PRINT/DISPLAY |
P = Print a hard copy of this report on your terminal's assigned printer. See the Edit Terminal Record Chapter for instructions on how to assign printers. D = Display this report on your terminal screen. See the General Data Entry Instructions Chapter on how to control screen display. EXAMPLE: Type P (RET) |
PRESS "F1"
AT "OPTION:" TO BEGIN PRINTING.