Print Fleet Adjustments

This program is used to:

Print out and review the adjustments to the fleet size that have been entered through the Change Class Availability program. These adjustments are normally done to pre-program anticipated major additions (purchases) and deletions (sales) of units in the fleet.

Check that the pre-programmed changes are still part of the fleet plan.

To access the Print Fleet Adjustments Report, type PRTADJ (RET) at any menu "OPTION:" or the appropriate line number on the Fleet Planning menu. The screen will then display:

OPTION: __ PRINT FLEET ADJUSTMENTS

1. Location ALL
2. Class ALL
3. Start date 04-12-04
4. Print/Display P

1BEGIN 2NEXT 3ERASE 4DELETE 5BACKUP 6 7HELP 8

Enter data as follows:

1. LOCATION	Enter up to 6 alphanumeric characters to indicate the Customers Pick-Up Location. Enter: 1. Up to 6 alphanumeric characters to select a single location. 2. A Group Name representing several locations. 3. Press RETURN to default to ALL locations. EXAMPLE: Type TUS (RET)
2. CLASS	Enter up to 5 alphanumeric characters to indicate the class of vehicles to be reported. Press RET to default to all classes. EXAMPLE: Type E (RET)
3. START DATE	Using your selected date format, enter the Starting Date. Press RET to default to today's date. Fleet adjustments with this date or later will be included in the report. Fleet adjustments with a date earlier than the date entered will NOT be included in the report. EXAMPLE: Type 081508 (RET)
4. PRINT/ DISPLAY	Enter: P = Print a hard copy of this report on your terminal's assigned printer. D = Display this report on your terminal screen. See the General Data Entry instructions Chapter on how to control the screen display. EXAMPLE: Type P (RET)

The screen will then display:

OPTION: __ PRINT FLEET ADJUSTMENTS

1. Location ALL
2. Class ALL
3. Start date 08-15-08
4. Print/Display P

1BEGIN 2NEXT 3ERASE 4DELETE 5BACKUP 6 7HELP 8

PRESS "F1" AT "OPTION:" TO BEGIN PRINTING.