The Hold
Code logic can be used to refine and control the ability to rent vehicles
beyond the controls imposed by the use of Vehicle Status Codes. Refer to the
chapter of this manual titled
Introduction to Hold Codes for an overview
of how this logic works.
Use this program to produce a listing of
the Hold Code messages on file.
To access
the program, type LISTMSG (RET) at any menu "OPTION:"
field or the appropriate number on the Hold Code Sub-Menu (History Maintenance
Menu.) The screen will then display:
| OPTION: Vehicle Hold Codes Messages Listing
1 Print/Display P Printer: /dev/tty
1PRINT 2 3ERASE 4 5 6 7HELP 8
|
Enter data
as follows:
|
1. PRINT/
DISPLAY |
Enter:
P = Print a hard copy of this report on your
terminal's assigned printer. See the Edit Terminal Records Chapter for
instructions on how to assign printers.
D = Display this report on this
screen. See the General Data Entry Instructions Chapter on how to control
the screen display.
EXAMPLE:
Type P (RET) |
PRESS "F1"
AT "OPTION:" TO BEGIN .